WB6WUI Simplex Repeater ADS–SR1
Mazama, Washington 98833


Quick Tests:

0 -- Play last Message
## 2 <n> Play Announcement ## 01 – Ping (Responds with beep)
3 or 6 – Wake-Up  (if sleep mode enabled) ## 95 – Report Battery Level
             Crazy  /  Easy As Mail ## 98 – Send Calibration Tone (1 kHz)
* 123 - Enter Voice Mail Mode;  1 = Previous, 2 =  Current, 3=Next, 0 = Delete current, * = Exit

Stock Command List

## 00 – Lock Repeater

## 08<code twice> – Set Security Code

## 78<code> Set activation code

## 09<time> – Auto-Lock Timer

## 7<0/1> – Repeater off/on

## 7<2/3> – Voicemail off/on

## 14<0/1> – Say-Again off/on

## 16 <4/5><n> Standby message off/on/select

## 11 <nn> – Transmit Audio Level

## 109 <n> – Squelch Mode (0=VOX,1=HI,2=LO)

## 13 <nn> VOX Timeout (1/10 second)

## 19 <nn> Min. Transmission Time (1/10 sec)

## 79 <nn> Squelch Tail Suppression (1/75 sec)

## 17 <time> Repeater Timeout

## 18 <time> Cooldown Time

## 12 <n> Courtesy Tone

## 16 <0/1> – Voice ID off/on

## 16 <8/9> Voice ID rotate on/off

## 85 <time> Voice ID Inhibit Timer

## 16 <2/3> Voice preamble off/on

## 2 <n> Play Announcement

## 3 <n> Record Announcement

## 4 <n> Erase Announcement

## 5 <n><time> Announcement Interval

## 6 <n><time> Announcement Time Offset

## 80 <0/1> CW ID off/on

## 81 <nn> CW Speed

## 82 <nn…> CW ID  (WB6WUI)

## 86  – Check CW ID

## 83 <time> CW ID Timer

## 15 <0/1> – CW ID responder off/on

## 84 <time> CW ID Inhibit Timer

## 01 – Ping (Responds with beep)

## 91 – Identify Firmware Revision

## 93 xy Set output in x to state y

## 95 – Report Battery Level

## 96 – Report usage count

## 97 – Load Default Settings

## 98 – Send Calibration Tone (1 kHz)

## 99 – Reset

Voicemail

## 02 – Check Voicemail

## 07<code twice> – Set Voicemail Code

## 74 – Erase All Voicemail Messages

* <code> or ## 02 to check

1 Play previous message

2 Repeat current message

3 Play next message

0 Erase message and play next

* Exit voicemail mode


Programming List

## 07 <code twice> – Set Voicemail Code  
## 08 515 <code twice> – Set Security Code  Unlock Code 515
## 09 240 <time> – Auto-Lock Timer  (4 minute programming time-out timer)
##   7 1 <0/1> – Repeater off/on  (On)  
##   7 <2/3> – Voicemail off/on  (Off)  
## 11<nn> – Transmit Audio Level  (Def)  
## 12 0 <n> Courtesy Tone  (off)  tone too loud

 

## 13 10 <nn> VOX Timeout (1/10 second)  (1)

1 second VOX active delay before eval

## 14 <0/1> – Say-Again off/on  (On)  
## 15 0 <0/1> – CW ID responder off/on  
## 16 1 <0/1> – Voice ID off/on  (On) Slot zero is voice ID message slot
## 16 <2/3> Voice preamble off/on  
## 16 <4/5><n> Standby message off/on/select  (Off)  
## 16 <8/9> Voice ID rotate on/off  (Off)  
## 17 <time> Repeater Timeout  
## 18 <time> Cool-down Time  
## 19<nn> Min. Transmission Time (1/10 sec)  
##   2 <n> Play Announcement       0=Repeater ID; "WB6WUI Repeater, Mazama"
## 78 <code> Set activation code (Pager)  
## 79 10 <nn> Squelch Tail Suppression (1/75 sec) Set about 133 ms (13 ms per digit)
## 80 0 <0/1> CW ID off/on  
## 81 <nn> CW Speed  
## 82 <nn…> CW ID (_=0,A=1,Z=26,0=31,9=39)  
## 83 11 <time> CW ID Timer 11 minutes but CW ID'er is disabled
## 84 <time> CW ID Inhibit Timer  
## 85 10 <time> Voice ID Inhibit Timer  (10 Min)

ID cycle time

## 86 – Check CW ID  
## 93 xy Set output in x to state y  
## 109 0 <n> – Squelch Mode (0=VOX,1=HI,2=LO) Vox set at 1 second for now

           Voicemail
##02 – Check Voicemail
##   3 <n>
Record Announcement
##   4 <n>
Erase Announcement
##   5 <n><time>
Announcement Interval
##   6 <n><time>
Announcement Time Offset
##74 – Erase All Voicemail Messages           Crazy  /  Easy As Mail


Revised: 08/20/2010 Webmaster